We make three types of lightning protection towers: lattice, tubular, and monopole. Lattice towers use angle steel — three-leg or four-leg — and suit sites where you need to protect a large area. Tubular and monopole are single-tube designs, better when ground space is tight. All towers are hot-dip galvanized to ISO 1461 or ASTM A123. Standard heights run from 15 m to 60 m. Typical installations include substations, telecom compounds, fuel storage areas, and industrial plants. Protection range is calculated using the rolling sphere method per GB 50057 or IEC 62305. Send us your site wind load, soil data, and the equipment you need to protect. We will recommend the right structure and give you the foundation reactions for your local engineer.